Make Your Own Coat Racks

If you find it too precious to buy a coat rack or you would prefer to customize your own coat rack design, you can actually make your own rack. The process is not as difficult as it seems. In fact, it can be done with just a few straightforward steps as long as you have the right materials with you.

The few materials you may need would be any pieces of wood, screws, sandpaper or sander, large size dowel and paint or stain. You may start off your do-it-yourself coat racks by deciding the style and also the rough size. If it is meant for kids' use then maybe you would want a shorter rack. The example size will be a 2 x 4 or 2 x 6 plank of woods with lengths about three or four feet. If you already have the pieces of wood with you, you may begin sanding the corners and all edges of a piece to be used as the center bar. Then cut a smaller piece of wood into half to be used as the base. Be sure that they are sufficiently large to maintain the coat rack. Then screw them onto another uncut piece of wood at 90-degree angle to form an "X" shape.

Rack Rails

Next you can attach the centerpiece onto the base. This will form the basic buildings of the standing type of racks. Then use the dowel or you may prefer the large C hooks and place them at any positions you like on the center pole. Attaching them onto the center post may want the hole-drilling process. Depending on your personal taste, you may wish to paint the materials before assembling them or some citizen will paint the coat rack after all is assembled. After the paint dries, the rack is completed and can be used immediately.

The do-it-yourself coat racks are also ready for the wall mounted type. It is much simpler to make. You can plainly get a piece of flat wood at any desired thickness and length then sand the wood for smoother surfaces. You can create the wood up to your creativity; whether plain, do some carvings, wood burning or bevel the wood edges. This is an advantage as citizen can make their very own unique rack. After completing the create part you can then drill the holes for hooks or pegs. Insert the hooks into the holes and for better attachment, place some glue onto it. Sand the edge and carry out some final cleaning then the rack should be done.

Make Your Own Coat Racks

See Also : cables network memory ram best games